Skip to main content

Reset Behaviors

Summary​

There are two available behaviors that can be used to trigger a reset of the keyboard. The first is a soft reset, that will simply reset and re-run the currently flashed firmware; the second when triggered will reset into the bootloader, allowing you to flash a new firmware to the keyboard.

Reset​

The basic reset behavior will reset the keyboard and re-run the firmware flashed to the device

Behavior Binding​

  • Reference: &sys_reset
  • Parameters: None

Example:

&sys_reset

Bootloader Reset​

The bootloader reset behavior will reset the keyboard and put it into bootloader mode, allowing you to flash a new firmware.

Behavior Binding​

  • Reference: &bootloader
  • Parameters: None

Example:

&bootloader

Split Keyboards​

Both basic and bootloader reset behaviors are source-specific: This means that it affects the side of the keyboard that contains the behavior binding for split keyboards. For example if you press a key with the &sys_reset binding on the left half of the keyboard, the left half will be reset. If you want to be able to reset both sides you can put the bindings on both sides of the keyboard and activate it on the side you would like to reset.